Gate Design in Pakistan: Modern, CNC & Wrought Iron Main Gate Ideas, Sizes & Price Guide 2026
The main gate is the first thing anyone sees of your house — before the elevation, before the door, before anything inside. In Pakistan, where the front of the house faces the street and the whole neighbourhood walks past it every day, the gate does more than open and close. It tells visitors what kind of house stands behind it, it keeps the family safe at night, and it has to survive sun, rain, dust and daily use for years without rusting, sagging or jamming.
This guide covers gate design in Pakistan for real Pakistani houses — the designs people actually order, the materials worth choosing, the sizes that fit a 5, 7, 10 or 12 marla plot, and what decides the price. Every design here is one Al Noor Metal fabricates in its Township, Lahore workshop, so the advice matches what can actually be built for your home.
Want a price for your gate? Send your measurements and a photo of your entrance on WhatsApp — Chat on WhatsApp or call +92 333-4314819 — and get a quote for your exact size and design. See finished work on the Main Gate Design page, and all contact options in the Contact Al Noor Metal section at the end of this guide.
The 10 Gate Designs at a Glance
| # | Design | Best for | Privacy | Maintenance |
|---|---|---|---|---|
| 1 | Modern CNC laser-cut gate | Modern house fronts, pattern lovers | Medium–High | Low |
| 2 | Wrought iron ornamental gate | Traditional and Spanish-style elevations | Medium | Medium |
| 3 | Sliding main gate | Wide plots, short driveways | As designed | Low–Medium |
| 4 | Simple iron / MS steel gate | Budget builds, rentals, side entrances | Medium | Low–Medium |
| 5 | Double door main gate | Wide entrances, 10 marla and larger plots | High | Low |
| 6 | Spanish / luxury style gate | Villas, luxury elevations | Medium–High | Medium |
| 7 | CNC sheet / jali gate | Pattern + privacy on a smaller budget | High | Low |
| 8 | Heavy-duty security gate | Corner plots, shops, high-security homes | High | Low |
| 9 | Modern frame + panel gate | Grey and white contemporary elevations | Medium–High | Low |
| 10 | Matching gate + railing set | Whole-house look, gate and balcony together | As designed | Low |
Why Your Main Gate Deserves Real Thought
A gate is bought once and lived with for a decade or more, so the three mistakes that cost the most are all made before the order is placed.
First, size. A gate that is too narrow for the family car turns every entry into a careful squeeze, and a gate that is too wide for its pillars sags on its hinges within a year. The width of the opening, the height of the pillars and the swing space inside the street all decide the design before any pattern is chosen. For the standard widths used on Pakistani plots, see our Standard Main Gate Sizes page.
Second, weight and hinges. A beautiful heavy gate on light hinges is a repair waiting to happen. Wrought iron and thick CNC sheet are heavy materials, and the frame, the pillars and the hinges must be sized for the real weight of the finished gate, not for the weight of the design on paper. This is the part of the job that never shows in a photo and decides whether the gate still swings smoothly in year five.
Third, rust. A gate stands in open weather on both faces, in rain, sun and dust, with its joints and bottom edge holding water after every wash. That is why the finish matters as much as the design: a gate without proper anti-rust treatment will show rust at the joints within a year or two, however good it looked on installation day. The rule for every material except aluminium and stainless steel is the same — surface preparation, anti-rust zinc primer, then powder coating or automotive paint — and the primer step is never skipped.
If you are planning the whole front of the house at once, the gate and the balcony railing should be chosen together so the patterns match. See our Balcony Railing Design in Pakistan guide for the railing side of the same front elevation.
The 10 Gate Designs in Detail
1. Modern CNC Laser-Cut Gate
A single steel sheet, cut by a CNC laser into a geometric, floral or Arabic pattern, set into a strong iron frame. The pattern is precise in a way hand cutting cannot match — every line the same depth, every repeat identical — and because the panel is one sheet, there are no welded joints in the middle of the design to rust first. This is the fastest-growing gate design in Pakistan, and it suits modern grey, white and concrete elevations best. Privacy is medium to high depending on how open the pattern is; a dense geometric mesh reads almost solid from the street, while an open floral cut lets light through. See the finished work on our CNC Main Gate Design in Pakistan page and the Modern CNC Gate Design product.
2. Wrought Iron Ornamental Gate
The classic choice: hand-forged scrolls, curves, spearheads and medallions, built the way gates have been built in Lahore for decades. A wrought iron gate suits traditional, Spanish and colonial-style elevations, and it can be repaired and repainted for decades — a bent scroll is straightened, not replaced. The open scrollwork gives medium privacy, so it is usually paired with a mesh or sheet backing where the family wants the street kept out of sight. For the matching price method and the full ornamental range, see our Wrought Iron Main Gate page and the Wrought Iron Main Gate Price in Pakistan 2026 guide.
3. Sliding Main Gate
Where the driveway is short, the street is narrow, or the plot is wide, a sliding gate is the practical answer — it rolls sideways along the boundary wall instead of swinging into the street or into the car porch. A sliding gate needs a clear run of wall beside the opening and a level track, so it is measured differently from a swing gate: the width of the opening plus the parking space for the gate itself. Al Noor Metal makes sliding gates in CNC, wrought iron and simple iron patterns, all on the same made-to-order basis. See the Sliding Main Gate Designs page and the three sliding products — Sliding Gate Design in Pakistan, Sliding Main Gate Design and Sliding Gate Design.
4. Simple Iron / MS Steel Gate
The honest budget option: a clean mild steel frame with vertical or horizontal bars, a solid sheet lower half, and a good paint finish. It is the same strength as wrought iron at a lower material cost, as long as the primer and paint are not skipped, and it suits rental properties, side entrances and houses where the budget belongs inside the house rather than on the gate. A simple gate can still look finished — a straight frame, even bars and a clean powder coat read as deliberate, not cheap. See our Simple Iron Main Gate Design in Pakistan page.
5. Double Door Main Gate
Two leaves meeting in the middle, for entrances too wide for a single leaf — typically 10 marla plots and larger, and houses with a double car porch. A double door gate spreads the weight across two sets of hinges, so each leaf stays true longer than one very wide single leaf would, and one leaf can be kept shut for daily use while both open for the car. The design can be CNC, wrought iron or simple iron; the decision is the width of each leaf and the strength of the centre meeting point. If your plot is 10 marla, read the Main Gate Design for 10 Marla House guide first — it covers the widths and the double-leaf layout for that plot size.
6. Spanish / Luxury Style Gate
Arched tops, heavy scrolls, antique gold against matte black, and a pillar design to match — the Spanish and luxury gate is chosen for villas and for houses where the front elevation is the statement. It is the most decorative of the ten designs and the one where the pillars, the wall caps and the gate must be designed as one piece; a luxury gate on plain pillars looks unfinished. See the Spanish Style Main Gate product for the finished design.
7. CNC Sheet / Jali Gate
A lighter cousin of the full CNC gate: a laser-cut jali sheet set into a simpler frame, giving pattern and privacy at a lower weight and cost than a full heavy-gauge CNC panel. It suits smaller houses and 5 marla plots, where a full CNC gate would overpower the front, and it is often the right answer when the family wants privacy from the street without a solid wall of steel. See the CNC Sheet Gate Design product. For a 5 marla plot, the Main Gate Design for 5 Marla House guide covers the sizes and the jali options that fit that frontage.
8. Heavy-Duty Security Gate
Thick bars, a reinforced frame, a solid lower panel and locks that are part of the design rather than an afterthought. This is the gate for corner plots, shops, and houses where security decides the design — and it still has to look like a house gate, not a jail door, so the bars are spaced and finished to suit the elevation. See the Heavy Duty Wrought Iron Main Gate product.
9. Modern Frame + Panel Gate
A slim iron frame with flat panels — plain sheet, slatted bars or a narrow CNC strip as the only decoration — for grey, white and concrete elevations where the house itself is the design and the gate should not compete with it. This is the quietest of the ten designs, and on a modern elevation it is often the best-looking: the gate reads as part of the boundary wall, not as a separate object. The finish is almost always matte black or charcoal powder coat, which holds its colour in the Lahore sun better than gloss.
10. Matching Gate + Railing Set
One pattern, cut once, used on the main gate, the balcony railing and the stair railing, so the whole front of the house reads as a single design. This is the best value of the ten when the house is being built or renovated in one go: the workshop cuts all the panels from the same drawings, the finish matches exactly, and the elevation looks planned rather than assembled over the years. Start with the gate, then match the railing from the Balcony Railing Design in Pakistan guide.
Gate Materials Compared
The material decides the price, the weight, the rust risk and the look — more than the pattern does. These are the materials Al Noor Metal works with for gates, compared honestly.
| Material | Look | Strength | Rust risk | Best for |
|---|---|---|---|---|
| Wrought iron | Classic, ornamental, scrolls and curves | Very strong | Medium — needs primer + paint | Traditional houses, front gates |
| CNC laser-cut steel | Sharp patterns, modern, precise | Strong (heavy-gauge sheet) | Low–Medium — needs powder coat | Modern houses, pattern lovers |
| MS (mild steel) | Plain, clean, painted | Strong | Medium — needs primer + paint | Budget work, rentals, side gates |
| Stainless steel | Bright, modern, slim pipes | Strong | Low | Modern villas, glass combinations |
| Aluminium | Light, slim, many colours | Lighter — not for heavy loads | Very low | Coastal homes, upper floors, light gates |
Wrought iron is still the most requested gate material in Pakistan: it suits old and new elevations and can be repaired and repainted for decades. CNC laser-cut panels are the fastest-growing choice — one sheet, one pattern, no welded joints to rust first. MS steel is the honest budget option, the same strength as wrought iron at a lower material cost, as long as the primer and paint are not skipped. Stainless steel suits glass combinations and modern villas. Aluminium is the lightest and most rust-proof, which suits Karachi’s coastal air — but it is not the right choice where the gate must take a heavy load or a hard daily knock. For Karachi we add a salt-air-resistant topcoat; for Faisalabad and Multan, heat-resistant paint.
Gate Sizes: What Fits Your Plot
There is no single standard gate size in Pakistan, because the opening is decided by the plot, the street and the car porch — but the widths people actually order fall into a familiar range. A single-leaf gate suits a narrow entrance; a double-leaf gate suits a wide one; and a sliding gate suits a plot where the swing space does not exist. The right size is the one measured at your own entrance, not the one on a neighbour’s house.
Three measurements decide the order: the width of the opening between the pillars, the height from the ground to the top of the pillars, and the space the gate needs to open — swinging inwards, swinging outwards, or sliding sideways. Send all three on WhatsApp with a photo of the entrance, and the workshop cuts the gate to your exact opening. For the widths used on the common plot sizes, see our Standard Main Gate Sizes page, the Main Gate Design for 5 Marla House guide and the Main Gate Design for 10 Marla House guide. For the newest ideas across all sizes, see the Top 10 Modern Main Gate Designs in Pakistan for 2026.
What Decides the Price of a Gate in Pakistan
No fixed price is listed for a gate, because every opening is a different size — and a fixed price would be wrong for most houses. Four things decide the quote: the pattern, the size, the material and the finish. A dense CNC pattern costs more than a simple bar gate because the laser time is longer; a wider and taller gate uses more steel; wrought iron and stainless steel cost more than MS steel; and a powder coat with a zinc-rich anti-rust primer costs more than a single coat of paint, and lasts longer.
That is why the quote is given from your measurements. Send the width and height of your opening on WhatsApp, with a photo of the entrance if you have one, and say which design and material you want. The workshop quotes your exact gate — no fixed price, no guess. For the price method in detail, including the per-foot logic used for CNC work, see our CNC Main Gate Price in Pakistan page.
How to Order Your Gate from Al Noor Metal
Ordering is a short process, and it starts on WhatsApp.
Step 1 — Send your size. Measure the width and height of your entrance, or send a photo of the opening with a tape measure in the frame. Tell us the design you like from this guide — the design number helps — and the material you prefer.
Step 2 — Get your quote. The workshop quotes the gate from your size, pattern and finish, and confirms the design, the colour and the fitting details before anything is cut.
Step 3 — Fabrication. The gate is cut, welded and finished in the Township, Lahore workshop — CNC patterns on the laser, wrought iron by hand — with the anti-rust primer and powder coat applied before fitting.
Step 4 — Fitting. The gate is fitted to your pillars with hinges sized for its real weight, and the swing or slide is tested before handover. Measurement visits in Lahore can be arranged when you book — confirm the visit when you send your size.
Al Noor Metal has been making gates in Pakistan since 2015, and every gate is made to order for one house — no ready-made gate is sold off a shelf.
Gate Design in Your City
Al Noor Metal serves houses across Pakistan from its Township, Lahore workshop, and the gate that suits a house depends on where the house stands — Karachi’s salt air, Islamabad’s rain, and Lahore’s dust each ask for a different finish.
- Lahore — the workshop city, and the widest range of designs on display. See Main Gate Design Lahore.
- Karachi — salt-air-resistant finishes for coastal homes. See Main Gate Design Karachi.
- Islamabad — rain-ready finishes and modern patterns for the capital’s elevations. See Main Gate Design Islamabad.
- Multan and Faisalabad — served with heat-resistant paint finishes for the hotter climate; no dedicated city pages yet, so contact the workshop directly for designs and quotes in these cities.
Frequently Asked Questions
Which gate design is best for a house in Pakistan?
There is no single best design — it depends on the elevation and the budget. A modern house suits a CNC laser-cut gate; a traditional or Spanish-style house suits wrought iron; a short driveway suits a sliding gate; and a tight budget suits a simple MS steel gate with a good powder coat. Send a photo of your front elevation on WhatsApp and the workshop will suggest the designs that fit it.
How much does a main gate cost in Pakistan?
There is no fixed price, because the price is decided by the pattern, the size, the material and the finish — and every opening is a different size. Send the width and height of your opening on WhatsApp with the design you like, and you will get a quote for your exact gate. The price method is explained on the CNC Main Gate Price in Pakistan page.
What is the best material for a main gate — iron or steel?
Wrought iron is the classic choice for ornamental gates and lasts decades with repainting. CNC laser-cut steel is the best choice for a modern pattern with no welded joints in the design. MS steel is the best budget choice at the same strength. The finish matters more than the name of the metal: a gate without anti-rust primer and powder coat will rust whatever it is made of.
Should I choose a sliding gate or a swing gate?
Choose a sliding gate when the driveway is short, the street is narrow, or the gate would hit the car when it swings open. Choose a swing gate when there is clear space inside the porch and you want the simpler fitting. A sliding gate needs a clear run of wall beside the opening and a level track; a swing gate needs swing space. Measure both before you decide.
How do I stop my iron gate from rusting?
Three steps, in order: proper surface preparation before painting, a zinc-rich anti-rust primer, and a powder coat or automotive paint topcoat — with a salt-air-resistant topcoat in Karachi. Repaint when the topcoat starts to thin, not after rust has already started, and keep the bottom edge and the joints clear of standing water.
Contact Al Noor Metal
For a quote, a design suggestion, or a measurement visit in Lahore, contact Al Noor Metal:
- WhatsApp / Call: +92 333-4314819 — Chat on WhatsApp
- Email: info@alnoormetalpk.com
- Workshop: Township, Lahore (College Road, Ameer Chowk)
- Hours: Monday to Saturday, 09:00–18:00
- Contact page: Contact Al Noor Metal
Send your entrance width and height, a photo of the opening, and the design number from this guide — and get a quote for the gate your house actually needs.

