Sliding Gate Design — Ground-Track, Cantilever & Telescopic Gates by Al Noor Metal
A sliding gate moves sideways along the boundary wall instead of swinging in or out. It needs no swing arc, so nothing is wasted on the driveway, and the gate can be as wide as the opening allows. Homes with a short front, shops with parking at the entrance, and factories that need a wide, secure opening all use sliding gates for the same reason — the gate goes sideways, and the space in front stays free.
Al Noor Metal designs, fabricates, and installs sliding gates for homes, shops, offices, warehouses, and factories across Pakistan, from our own workshop in Township, Lahore. Every gate is made to order for your exact opening. Trusted since 2015.
Starting from Rs. 150,000 — an indicative starting price only. Your exact quote depends on the size of your opening, the material, the design, the track type, and whether you add automation. Send your opening measurements and a photo of the front on WhatsApp — Chat on WhatsApp or call +92 333-4314819 — and we will quote the gate for your exact opening.
Looking for the main-entrance version? See our Sliding Main Gate Design product, made for house fronts. Want the Pakistan-market guide? See Sliding Gate Design in Pakistan.
Sliding Gate Design Types — Which One Fits Your Site?
There are three sliding gate designs, and the right one depends on your ground, your side space, and how wide the opening is. The panel can look the same in all three — the difference is what carries it.
1. Ground-Track Sliding Gate
The panel runs on wheels inside a steel track fixed across the driveway. It is the simplest sliding gate design, the most common on Pakistani homes, and the lowest in cost. It needs a flat, level driveway and a straight wall run beside the opening, and the track must be swept once a week — dust and stones in the track are the most common reason a ground-track gate sticks.
2. Cantilever Sliding Gate
The panel hangs from roller carriages on posts and floats above the driveway — no track on the ground at all. A cantilever sliding gate design costs more — heavier posts, footings, and hardware, plus a counterweight tail. In return it copes with slopes, gravel, and uneven ground, and there is no track to sweep or flood.
3. Telescopic & Bi-Parting Sliding Gate
Two panels that slide apart, or two narrower panels that slide over each other and stack into a short side run. A telescopic sliding gate design is the answer when the opening is wide but the wall beside it is short — a wide factory entrance, a corner plot, or a front where a pillar cuts the side run short.
| Type | How it moves | Side room | Ground | Best for |
|---|---|---|---|---|
| Ground-track | Wheels in a floor track | One panel width | Flat concrete | Homes, shops |
| Cantilever | Hangs from roller carriages | Panel width + tail | Slopes, gravel | Sloped plots, busy roads |
| Telescopic / bi-parting | Two panels sliding apart or stacking | Half to two-thirds of a panel | Flat or uneven | Wide openings, factories |
Materials for Sliding Gates — Compared
The material decides the weight, the rust resistance, and the look. Four materials cover almost every sliding gate design we make.
| Material | Weight | Rust resistance | Look | Best for |
|---|---|---|---|---|
| MS iron (mild steel) | Heavy | Needs primer + powder coat | Classic, any pattern | Homes, budget jobs |
| CNC laser-cut steel | Medium–heavy | Needs primer + powder coat | Sharp patterns, modern | Modern elevations |
| Stainless steel | Medium | High — resists rust | Polished, clean, modern | Coastal areas, premium fronts |
| Aluminium | Light | Very high — does not rust like iron | Light, minimal, louvered | Humid areas, light gates |
MS iron is the workhorse of sliding gates in Pakistan — strong, easy to fabricate into any pattern, and the most affordable. It needs an anti-rust primer and a powder coat, and the bottom edge needs the most attention, because water sits there.
CNC laser-cut steel gives the sharpest patterns — geometric lines, floral work, or Islamic geometric repeats cut cleanly by laser. A CNC sliding gate design suits modern elevations where the gate is part of the architecture. For matching laser-cut work, see our CNC main gate design in Pakistan page.
Stainless steel keeps a polished finish and resists rust far better than mild steel, which is why it is used on premium fronts and in humid, coastal air. It suits clean, modern designs — vertical bars, plain grids, or one geometric repeat.
Aluminium is light, so the gate is easy to slide by hand and easy for a motor to move, and it does not rust the way iron does. Aluminium louver panels give full privacy while air still flows through.
Every MS iron and CNC steel gate we make is finished over an anti-rust primer with a powder coat. If your street floods in the monsoon, say so when you order: a raised track bed, good drainage, or a cantilever system keeps the gate moving when water covers the road.
Sizes — Homes, Shops & Factories
A sliding gate is sized by its use, not by a fixed chart. The clear opening between the finished pillars decides the panel width, and the wall beside the opening decides whether sliding is possible at all.
| Use | Typical clear opening | Typical height | Panel |
|---|---|---|---|
| Home — single vehicle | 10–12 feet | 6–7 feet | Single panel |
| Home — wide / double | 12–14 feet | 7 feet | Single or telescopic |
| Shop / office | 10–16 feet | 6–8 feet | Single or bi-parting |
| Warehouse / factory | 14–20 feet | 8–10 feet | Telescopic or bi-parting |
The side-run rule: a single-panel sliding gate needs a straight, unobstructed run of wall beside the opening, at least equal to the width of the gate panel, plus an extra 1 to 2 feet for the motor tail and the end of the track. Before ordering, measure the clear opening between the pillars, the straight wall run beside the opening, and whether the pillars are strong enough for the gate’s weight. For the full design guide, read our Sliding Main Gate Designs in Pakistan blog.
Security, Automation & Access Control
A sliding gate is a security gate first and a design piece second. The panel is only as secure as its track, its lock, and its pillars. It locks with a manual lock and a ground bolt, or with an electric lock released from a remote or an intercom — and the lock should hold the panel at the closed end, because a gate that can be lifted off its track is not secure.
Automation: motor and automation are available on request, sized to your gate’s weight. A motor is rated by the gate weight it can move, so the motor must be rated above your gate’s actual weight, with margin. No specific motor brand is promised here — the motor is chosen by weight rating, warranty, and spare-part availability in your city.
Access control — pick it by daily use: a remote keyfob suits a family home; an intercom suits homes that receive visitors; a keypad or RFID suits offices and factories that want entry logs.
Safety and power cuts: every automated gate needs photocell safety sensors, which stop the gate if a child, a pet, or a car is in its path, and a manual release — a key that disengages the drive so you can slide the gate by hand when the power is out. A battery backup keeps it working through load shedding.
Why Choose a Sliding Gate
- No swing arc. You can park right up to the front edge, and the gate never swings out onto the street or into the driveway.
- Wide openings, one gate. A sliding gate can cover a 16- or 20-foot opening that a swing gate cannot, which is why factories and warehouses use them.
- Strong security. A sliding panel on a fixed track, with a proper lock and end stops, is hard to force open, and wind cannot push it open.
- Automation-ready. A sliding gate is the easiest gate type to automate, because the motor only has to push the panel in a straight line.
- Works on slopes. A cantilever sliding gate works where a swing gate would scrape and a ground-track gate would jam.
Sliding Gate Price — Starting from Rs. 150,000
Starting from Rs. 150,000. That is an indicative starting price only — not a fixed final price. Your exact quote depends on the factors below, so send your measurements and a photo on WhatsApp for a price for your gate.
- Size and weight of the panel — a wider, taller, heavier panel needs more steel, a stronger track, bigger rollers, and a bigger motor.
- Material — MS iron is the most affordable; CNC laser-cut steel adds laser time; stainless steel and aluminium cost more than mild steel.
- Pattern complexity — a plain slat panel is cheapest; a dense CNC pattern takes more laser time; hand-forged wrought iron takes the most labour. For wrought iron ideas, see our wrought iron main gate page.
- Track type — a ground-track system costs less than a cantilever system, which needs heavier posts and hardware.
- Automation and access control — the motor is priced by its weight rating; a remote is cheapest, and intercom, keypad, and RFID each add to the total.
- Installation and site work — a level concrete track bed, drainage, wiring, and pillar strengthening are quoted per site.
How Installation Works — 5 Steps
Step 1: Send your measurements on WhatsApp
Message us on WhatsApp at +92 333-4314819 with the clear opening between your pillars, the straight wall run beside the opening, and a photo of the front. Ask on WhatsApp about a site visit in your city.
Step 2: Choose your type, material, and design
Pick a sliding gate design from the types and materials above, or send a reference photo of a design you like. We will confirm the track system from your wall run and ground, and the automation size from the gate’s weight.
Step 3: Get your quote
You receive a quote for your exact job, based on current steel rates, your measurements, material, design, track type, and automation. Approve it, and fabrication starts.
Step 4: Fabrication in our Lahore workshop
Your gate is fabricated, finished, and quality-checked in our Township, Lahore workshop.
Step 5: Track work, fitting & handover
We agree the fitting date with you before the team travels. Our team prepares the track bed or the cantilever posts, fits the gate, and tests it on site — then shows you the manual release, so you can open the gate by hand if the power goes out.
Start now: Chat on WhatsApp or call +92 333-4314819 — send your measurements and a photo, and get a quote.
Sliding Gates in Lahore, Karachi & Islamabad
Al Noor Metal fabricates and installs sliding gates across Pakistan from its Township, Lahore workshop.
- Lahore — our home city — DHA, Bahria Town, Johar Town, Gulberg, Model Town and nearby areas — for homes, shops, and factories.
- Karachi — sliding gates for DHA, Clifton, Gulshan, and Bahria Town Karachi, with rust-resistant finishes for humid, coastal air.
- Islamabad — sliding gates for DHA Islamabad, Bahria Town, F- and G-sectors, and Rawalpindi, where narrow fronts and slopes make sliding gates practical.
We also serve Multan and Faisalabad — mention your city when you ask for a quote, and delivery and installation are arranged for your site.
Message us on WhatsApp to ask about measurement and fitting in your city.
Frequently Asked Questions (FAQs)
How much side space does a sliding gate need?
A single-panel sliding gate needs a straight, clear wall run beside the opening at least equal to the panel width, plus 1 to 2 feet for the motor tail and track end. If the side run is short, a telescopic or bi-parting gate can still work.
Which sliding gate type suits a warehouse or factory?
A telescopic or bi-parting gate on a ground track, or a cantilever gate where the ground is uneven. Factories need wide openings — 14 to 20 feet — and gates opened many times a day, so the track, rollers, and automation must be sized for heavy use.
Does a sliding gate work on a sloped driveway?
A ground-track gate needs flat, level ground — it will jam on a slope. A cantilever gate hangs above the driveway and copes with slopes and uneven ground. If your driveway slopes across the opening, ask for a cantilever system.
Can my existing pillars be used for a sliding gate?
Often yes, if the pillars are strong enough for the gate’s weight and the track or posts can be fixed to them. Send a photo of your pillars on WhatsApp with your measurements, and we will tell you whether they can be used.
How do I look after a sliding gate?
Sweep a ground-track gate’s track with a stiff broom once a week and rinse it when dust builds up. Check the bottom rail after the monsoon, keep the rack clean and lightly greased, and wipe the sensors so dust does not block them. Service the motor if it starts running slow or sounding strained.
Contact Al Noor Metal
Order your sliding gate in one message — send your measurements, a photo of the front, and the design you liked.
- WhatsApp / Call: +92 333-4314819 — Chat on WhatsApp
- Email: info@alnoormetalpk.com
- Workshop: Corner AL-Qaseem Market, Ameer Chowk, College Road, Township, Lahore
- Hours: Monday–Saturday, 09:00–18:00
- Contact page: Contact Al Noor Metal
- Service areas: Lahore, Karachi, Islamabad, Multan, and Faisalabad. Message us on WhatsApp to ask about measurement and fitting in your city.
Call to action: WhatsApp Al Noor Metal on +92 333-4314819 with your gate opening measurements and a photo of your front — get a quote for your sliding gate design today. Al Noor Metal has made gates, doors, railings and grills in Pakistan since 2015.





Reviews
There are no reviews yet.