Main Gate Design for 5 Marla House: 10 Ideas, Sizes & Price Guide 2026
A 5 Marla house has a small front — usually around 25 feet wide — and its main gate has to do a lot in very little space. It must let one car in and out easily, keep the house secure, give privacy from the street, and still make the elevation look finished. A gate designed for a 1 Kanal house will not fit that job: it is too wide, too heavy for the pillars, and it costs more than a small house needs to spend.
This guide is written for the 5 Marla house only. It covers 10 main gate designs that actually suit a small front, the standard size for a 5 Marla gate, the materials worth choosing, what decides the price, and how to keep an iron gate rust-free. Every design here is one Al Noor Metal fabricates in its Township, Lahore workshop, so the sizes and the advice match what can actually be built for your opening.
Want a price for your gate? Send your opening measurements and a photo of your front on WhatsApp — Chat on WhatsApp or call +92 333-4314819 — and get a quote for your exact size and design. See finished work on the CNC main gate design in Pakistan page, and all contact options in the Contact Al Noor Metal section at the end of this guide.
The 10 Main Gate Designs for a 5 Marla House at a Glance
| # | Design | Best for | Privacy | Maintenance |
|---|---|---|---|---|
| 1 | Horizontal slatted iron gate | Narrow fronts, modern elevations | Medium–High | Low |
| 2 | CNC laser-cut jali gate | Pattern + privacy on a small front | Medium–High | Low |
| 3 | Vertical picket iron gate | Tall, light look on a narrow front | Medium | Low |
| 4 | Frame + mesh panel gate | Light, air and visibility | Low–Medium | Low–Medium |
| 5 | Double-leaf gate with wicket door | Daily coming and going | High | Low |
| 6 | Sliding gate | Narrow streets, no swing room | As designed | Low–Medium |
| 7 | Bi-fold / folding gate | Short driveways | Medium–High | Low–Medium |
| 8 | Light wrought iron scroll gate | Traditional look, scaled down | Medium | Medium |
| 9 | Dual-tone iron + wood-look gate | Modern grey / concrete elevations | High | Low–Medium |
| 10 | Solid sheet gate with CNC border | Maximum privacy | High | Low |
What Makes a 5 Marla Gate Different
A 5 Marla plot is 1,125 square feet, and in most housing societies its front is about 25 feet wide. The gate opening is usually around 10 feet, the porch fits one car, and the street outside is often narrow. Those three facts decide almost everything about the design.
First, width. A 10-foot opening takes one car — a sedan or a hatchback — comfortably, but there is no room for a second car or for a wide turning circle. The gate must open fully without blocking the street, and it must not need a swing arc the driveway does not have. That is why sliding and folding gates appear in this guide: a swing gate that opens outward can block a narrow street, and one that swings inward can hit the parked car.
Second, proportion. A gate that is too tall or too heavy makes a small front look smaller. Most main gates stand 6 to 7 feet tall, which matches a standard boundary wall and gives privacy from passers-by. On a 5 Marla front, 6 to 7 feet is the right height — taller looks top-heavy, shorter gives away privacy. For the full size tables by plot size, see our guide to standard main gate sizes in Pakistan.
Third, weight. A 5 Marla gate is usually held by ordinary brick pillars, not the heavy reinforced pillars of a 1 Kanal house. A light, well-framed gate lasts longer on those pillars than a heavy over-decorated one, and its hinges stay true. Every design below is chosen with that limit in mind.
If you are also choosing the main door, the same thinking applies — a door sized to the entrance, not to a bigger house. See our main door design in Pakistan guide and the CNC door design in Pakistan guide for a matching door.
The 10 Main Gate Designs for a 5 Marla House in Detail
1. Horizontal Slatted Iron Gate
Straight horizontal rows of hollow steel sections, set with even, narrow gaps, inside a solid frame. It suits a 5 Marla front particularly well: the horizontal lines make a narrow front look wider, and the gate stays light enough for ordinary hinges and pillars.
Best for: 5 Marla homes, narrow fronts, modern grey or white elevations. Pair it with a matching simple iron main gate design approach if you want the whole entrance kept minimalist.
2. CNC Laser-Cut Jali Gate
A steel sheet with a pattern cut through it by a computer-controlled laser — geometric lines, an Islamic pattern, or a design drawn from your own photo — set into a strong iron frame. Because the pattern is cut by laser instead of bent by hand, the lines are sharp, the repeats are identical, and the same pattern can run across your gate and your main door as a matching set.
On a 5 Marla front, a half-jali design — solid sheet at the bottom, cutwork at the top — is the most popular choice: privacy where it matters, light where it helps. See finished examples on our CNC main gate design in Pakistan page and the CNC grill design in Pakistan guide.
Best for: 5 Marla homes that want a designer look without a heavy gate, and owners who want the gate and door to match.
3. Vertical Picket Iron Gate
Upright iron bars set close together in a frame, with pointed or flat tops. It is the tallest-looking of the light gates: the vertical lines draw the eye upward, and the open bars keep the porch bright and aired.
Best for: 5 Marla homes with a tall or narrow elevation, and streets where you want to see who is at the gate before opening it.
4. Frame + Mesh Panel Gate
A tight iron mesh set inside a solid steel border. From the street it reads as one clean dark panel; from inside, it lets in light and air. It is lighter than a solid sheet gate, which matters on a 5 Marla pillar.
Best for: 5 Marla homes on hot, airless streets, and houses where the porch needs ventilation. The mesh needs a proper powder-coated finish — bare mesh rusts first at the joints, so check the coating before you accept the gate.
5. Double-Leaf Gate with a Wicket Door
Two leaves that meet in the middle, with a small pedestrian door — a wicket — built into one leaf. You open the wicket for daily coming and going and both leaves only when the car moves. On a 5 Marla house this is the most practical design of all: the full gate opens perhaps twice a day, while the wicket opens twenty times, and each wicket opening is lighter and quicker.
Best for: Every 5 Marla house with a 10-foot opening. If you choose only one feature for your gate, choose the wicket door.
6. Sliding Gate
One panel that slides along the wall on a track, instead of swinging into the driveway or out onto the street. For a 5 Marla house on a narrow street, this is often the difference between parking comfortably and shuffling the car every time someone opens the gate. It needs a clear run of wall beside the opening — roughly the width of the gate itself.
Best for: Narrow streets, short driveways, and 5 Marla homes where a swing gate would hit the car. Our sliding main gate designs guide covers the designs and the clearance they need.
7. Bi-Fold / Folding Gate
A gate that folds back on itself in sections and slides out of the way. It needs almost no swing room and no long wall run, which makes it the answer for the tightest 5 Marla plots — a short driveway, a narrow street, a wall that turns a corner beside the gate.
Best for: The smallest 5 Marla fronts, corner plots, and houses where neither a swing gate nor a sliding gate fits.
8. Light Wrought Iron Scroll Gate
The traditional wrought iron look — scrolls, curls and spearheads — built light, with slimmer bars and a simpler pattern than the heavy wrought iron gates made for 1 Kanal houses. The pattern is kept open and the scrollwork is used as a border or a centre panel, so the weight stays within what a 5 Marla pillar can carry.
Best for: 5 Marla homes with a traditional or classic elevation, and owners who want the wrought iron look without the wrought iron weight. See our wrought iron main gate page for the heavier traditional designs.
9. Dual-Tone Iron + Wood-Look Gate
An iron frame with panels in a wood-look finish — powder-coated steel or aluminium composite in a teak or walnut tone — paired with matte black iron. It suits the modern grey-and-concrete elevations going up in new housing schemes: warm enough to soften the concrete, dark enough to stay modern, and lighter than a solid timber gate.
Best for: New 5 Marla constructions with fair-face concrete, grey plaster or cubist elevations.
10. Solid Sheet Gate with a CNC Border
A plain mild-steel sheet for full privacy, edged with a laser-cut CNC border or a patterned top rail so it does not read as a blank metal wall. It is the heaviest design in this guide, so it needs a properly built frame and good hinges — but for a street-facing 5 Marla house where privacy comes first, it is the most complete answer.
Best for: Street-facing 5 Marla houses, houses on busy roads, and owners who want full privacy from the street.
Main Gate Size for a 5 Marla House
The standard main gate size for a 5 Marla house is 10 feet wide and 6 to 7 feet tall, measured as the clear opening between the finished pillars — not the panel size, which is made slightly smaller for hinges, locks and drop bolts. That opening takes one car, a sedan or a hatchback, with room to spare. A wider opening of 12 feet appears on some 5 Marla plans, usually where the street is very narrow and the car needs more room to turn in; measure the built opening before ordering — construction rarely matches the drawing to the inch.
| Gate width | Height | What it fits |
|---|---|---|
| 10 feet (standard for 5 Marla) | 6–7 feet | One car — a sedan or hatchback |
| 12 feet (some 5 Marla plans) | 6–7 feet | One car with an easier turn-in from a narrow street |
Single leaf or double leaf? The dividing line is roughly 8 to 10 feet. A single leaf suits openings up to 8 to 10 feet and works well as a sliding gate, where one panel slides along the wall. A double leaf suits a 10-foot opening best: each leaf is half the weight, so you can open one leaf for a person and both for the car. Unequal leaves — one wide leaf for the car, one narrow leaf for daily use — give you a built-in wicket without a separate door. For the full tables, see standard main gate sizes in Pakistan and the comparison of wrought iron main gate sizes, 10 vs 12 feet.
Before you order, measure three things: the width between the finished pillars at the top and at the bottom (they are rarely the same), the height from the finished floor, and the swing or slide clearance — the space the gate needs to open fully without hitting the car, the wall or the street. Send those measurements on WhatsApp and the workshop will confirm the size before fabrication.
Which Material Suits a 5 Marla Gate
| Material | Strengths | Watch out for |
|---|---|---|
| Mild steel (iron) | Strong, affordable, any design possible | Rusts if the coating fails — needs primer + powder coating |
| Stainless steel | Resists rust far better, bright finish | Costs more; heavier; fewer decorative options |
| Wrought iron | Classic look, very strong | Heavy — keep the pattern light on a 5 Marla pillar |
| Iron + aluminium composite panel | Light, modern, wood-look finishes | Panels can dent; check the frame fixing |
For most 5 Marla houses, mild steel with a proper powder-coated finish is the right balance: strong enough to trust, light enough for the pillars, and the finish — not the metal — is what decides how long it stays rust-free. Stainless steel is worth it if your street floods in the monsoon. Wrought iron is worth it if the classic look is the point of the gate — but keep the scrollwork light, as design 8 above shows.
What Decides the Price of a 5 Marla Gate
No honest guide can give you a fixed price for a 5 Marla gate without your measurements, because the price is set by five things that change from house to house:
- Size: a 12-foot gate uses more material and a stronger frame than a 10-foot gate of the same design.
- Design: a plain slatted gate costs less than a full CNC jali gate, because laser cutting takes machine time and a cut sheet takes more steel than open bars.
- Material and thickness: thicker sections and stainless steel cost more than standard mild steel; the gauge of the sheet and the frame is the single biggest hidden difference between two quotes.
- Finish: powder coating costs more than ordinary paint, and it is the finish that decides whether the gate rusts in two years or ten.
- Fittings: heavy hinges, a proper lock, drop bolts and a wicket door add cost — and they are the parts that fail first on a cheap gate.
That is also why two quotes for “a 5 Marla gate” can look very different: they are rarely for the same thickness, finish and fittings. When you compare quotes, ask for the sheet gauge, frame section and coating type in writing. For a full breakdown, see our wrought iron main gate price in Pakistan 2026 guide.
For an exact price for your house, send your opening size, your design choice and a photo of the front on WhatsApp — Chat on WhatsApp — and get a quote for your gate, not for a generic one.
Matching the Gate to Your Elevation and Main Door
A gate looks right when it matches the house behind it. A modern grey elevation wants clean lines — a slatted gate, a CNC geometric pattern, or a dual-tone gate. A traditional elevation with arches or brickwork wants scrolls or pickets.
Two practical rules. First, repeat one element: if the main door has a CNC pattern, use the same pattern — or a simpler version of it — on the gate, so the entrance reads as one design. Our CNC main door design page shows matching door-and-gate sets. Second, keep the colour to one or two tones: matte black with one accent — a wood-look panel, a brass handle, a steel border — looks finished; three or four colours look busy on a small front.
If you are still choosing the main door, the CNC door design in Pakistan guide covers door materials and sizes, and the Top 10 Modern Main Gate Designs in Pakistan for 2026 post shows the wider design trends these 5 Marla designs come from.
Keeping a 5 Marla Gate Rust-Free
An iron gate lives outdoors through dust storms, monsoon rain and summer heat, and rust starts where the coating fails — at the bottom edge, at the joints, and anywhere the gate is scratched. Four habits keep it away:
- Wash it after dust storms. Dust holds moisture against the steel. A wash with plain water and a wipe-down is enough.
- Touch up chips quickly. A scratched spot is where rust starts. A small tin of matching paint, applied the week the chip appears, stops it.
- Oil the hinges and lock twice a year. A stiff hinge strains the pillar and the frame; a drop of oil keeps the gate swinging true.
- Check the bottom edge before the monsoon. Water sits at the bottom rail. If the coating there is thin or bubbling, get it touched up before the rains.
A powder-coated gate, looked after this way, stays clean for years. A painted gate needs the same care more often — the coating is thinner, so chips matter sooner.
How to Order a Main Gate for Your 5 Marla House
- Measure the opening — width between the finished pillars at top and bottom, height from the finished floor, and the swing or slide clearance.
- Choose the design — pick one of the 10 above, or send a photo of a gate you like and the workshop will adapt it to your size.
- Send it on WhatsApp — measurements, a photo of the front, and your area. You get a quote for your exact gate, including the frame, fittings and finish.
- Confirm the details in writing — sheet gauge, frame section, coating type, lock and hinges, and the fitting date — before fabrication starts.
- Check the gate on delivery — the coating, the welds, the hinges and the lock — before it is fixed to your pillars.
Al Noor Metal fabricates in its Township, Lahore workshop and fits gates across Lahore, Karachi and Islamabad, and in Multan and Faisalabad. A free on-site measurement in Lahore is available — confirm it when you book, as availability depends on the schedule.
Frequently Asked Questions
Q1: What is the standard main gate size for a 5 Marla house?
The standard size is 10 feet wide and 6 to 7 feet tall, measured as the clear opening between the finished pillars. Some 5 Marla plans show 12 feet, usually where the street is narrow. Measure the built opening before ordering — construction rarely matches the drawing to the inch.
Q2: Which main gate design is best for a 5 Marla house?
For most 5 Marla houses, a horizontal slatted iron gate or a CNC jali gate works best: both suit a narrow front, stay light enough for ordinary pillars, and give privacy without making the front look closed off. If your street is narrow, a sliding or bi-fold gate solves the opening problem a swing gate cannot. Add a wicket door for daily use.
Q3: Is a CNC gate a good choice for a 5 Marla house?
Yes — a half-jali CNC gate is one of the best choices for a small front. The solid lower half gives privacy, the laser-cut upper half lets in light and air, and the same pattern can run across the gate and the main door as a matching set. It costs more than a plain slatted gate, so get a quote for your exact size first.
Q4: Should a 5 Marla gate be single leaf or double leaf?
Double leaf suits a 10-foot opening best: each leaf is half the weight, so the hinges last longer and you can open one leaf for a person and both for the car. A single leaf works up to 8 to 10 feet and is the usual choice for a sliding gate. Unequal leaves give you a built-in wicket door for daily use.
Q5: How much does a main gate for a 5 Marla house cost in Pakistan?
There is no fixed price without your measurements. The price depends on the size (10 or 12 feet), the design (plain slatted vs full CNC jali), the material and sheet thickness, the finish (powder coating vs paint), and the fittings (hinges, lock, wicket door). Send your opening size and design choice on WhatsApp for an exact quote.
Q6: How do I stop my iron main gate from rusting?
Keep the coating intact: wash off dust after storms, touch up chips the week they appear, oil the hinges and lock twice a year, and check the bottom edge before the monsoon. Powder coating lasts far longer than ordinary paint, and it is the finish — not the metal — that decides how long the gate stays rust-free.
Main Gate Designs in Your City
Al Noor Metal designs, fabricates and fits main gates for 5 Marla houses in Lahore, Karachi and Islamabad — see each city’s page for local designs and fitting. Gates are also supplied in Multan and Faisalabad; contact the workshop directly for those cities.
Contact Al Noor Metal
For a quote, a design consultation, or a free on-site measurement in Lahore, contact Al Noor Metal:
- WhatsApp / Call: +92 333-4314819
- Email: info@alnoormetalpk.com
- Workshop: Township, Lahore (College Road, Ameer Chowk)
- Hours: Monday to Saturday, 09:00–18:00
- Contact page: Contact Al Noor Metal
Send your opening measurements and a photo of your front on WhatsApp, and get a quote for a gate built for your 5 Marla house — not a generic one.


Pingback: Main Gate Design for 10 Marla House 2026 | 10 Ideas, Sizes & Price Guide
Pingback: Gate Design in Pakistan | Modern, CNC & Wrought Iron Main Gates