Main gate design for 10 marla house

Main Gate Design for 10 Marla House: 10 Ideas, Sizes & Price Guide 2026

Main Gate Design for 10 Marla House: 10 Ideas, Sizes & Price Guide 2026

A 10 Marla house is twice the plot of a 5 Marla house — 2,250 square feet against 1,125 — and its main gate is a different job. The front is wider, the porch often fits two cars, and the opening is usually 12 to 20 feet instead of 10.

This guide is written for the 10 Marla house only, with a section on 1 Kanal houses at the end. It covers 10 designs for a wider front, the right size for each common 10 Marla plot shape, the materials worth choosing, what decides the price, and how to keep an iron gate rust-free — every one fabricated by Al Noor Metal in its Township, Lahore workshop.

Want a price for your gate? Send your opening measurements and a photo of your front on WhatsApp — Chat on WhatsApp or call +92 333-4314819 — and get a quote for your exact size and design. See finished work on the CNC main gate design in Pakistan page, and all contact options in the Contact Al Noor Metal section at the end of this guide. If your house is a 5 Marla, start with our companion guide to main gate design for 5 marla house instead — the sizes there are written for a small front.

The 10 Main Gate Designs for a 10 Marla House at a Glance

#DesignBest forPrivacyMaintenance
1Double-leaf iron gate with wicket doorThe standard 12–15 ft openingHighLow
2Full CNC laser-cut jali gateDesigner look on a wide frontMedium–HighLow
3Sliding gate for wide frontsNarrow streets, wide openingsAs designedLow–Medium
4Grand wrought iron scroll gateTraditional look, strong pillarsMediumMedium
5Horizontal slatted gate, wide formatModern elevations, wide frontsMedium–HighLow
6Bi-fold gate for wide openingsShort driveways, wide gatesMedium–HighLow–Medium
7Dual-tone iron + wood-look gateModern grey / concrete elevationsHighLow–Medium
8Arched-top gateClassic elevations, tall boundary wallsMedium–HighLow–Medium
9Stainless steel + iron combination gateMonsoon-prone streets, bright finishMedium–HighLow
10Solid sheet gate with CNC borderMaximum privacy on a busy roadHighLow

What Makes a 10 Marla Gate Different

A 10 Marla plot is 2,250 square feet, but that number alone does not decide the gate — the shape of the plot does. The common 10 Marla shapes in Lahore’s housing societies are 35×65, 35×70, 40×60 and 50×50, and each one puts the gate in a different place.

House-plan guides for these plot sizes suggest the following gate widths as a starting point — treat them as plan figures, not as a measurement of your house. The built opening is what matters, and construction rarely matches the drawing to the inch.

Plot shapeFront widthSuggested gate width (house-plan guides)
35 × 6535 feet15 feet
35 × 7035 feet18 feet
40 × 6040 feet12 feet
50 × 5050 feet20 feet

Three things follow from the wider front. First, two cars: a 10 Marla porch often fits two cars, so the gate must open wide enough for the second car to turn in without scraping the pillars. Second, weight: a 12 to 20-foot gate is heavy, and it needs properly built pillars, strong hinges and a frame that will not sag — a light 5 Marla design scaled up will not do. Third, proportion: most gates stand 6 to 7 feet tall, and on a 10 Marla front 7 feet usually looks better than 6, because the width needs the height to balance it. For the full size tables, see our guide to standard main gate sizes in Pakistan and the comparison of wrought iron main gate sizes, 10 vs 12 feet.

If you are also choosing the main door, see our main door design in Pakistan guide and the CNC door design in Pakistan guide for a matching door.

The 10 Main Gate Designs for a 10 Marla House in Detail

1. Double-Leaf Iron Gate with a Wicket Door

Two leaves that meet in the middle, with a small pedestrian door — a wicket — built into one leaf. At 12 to 15 feet wide, a single leaf would be far too heavy for its hinges, while two leaves share the weight. You open the wicket for daily use and both leaves only when a car moves.

Best for: Almost every 10 Marla house with a 12–15 ft opening. If you choose only one feature for your gate, choose the wicket door.

2. Full CNC Laser-Cut Jali Gate

A steel sheet with a pattern cut through it by a computer-controlled laser — geometric lines, an Islamic pattern, or a design from your own photo — set into a strong iron frame. A 10 Marla front gives the pattern room a 5 Marla front cannot: the design can run full-width across both leaves. Laser cutting keeps the lines sharp and the repeats identical, and the same pattern can run across your gate and your main door as a matching set.

Best for: 10 Marla homes that want a designer look, and owners who want the gate and the door to match. See finished examples on our CNC main gate design in Pakistan page and the CNC grill design in Pakistan guide.

3. Sliding Gate for Wide Fronts

One panel that slides along the wall on a track, instead of swinging into the driveway or out onto the street. A 15-foot swing gate needs a 15-foot arc of clear driveway, and many 10 Marla porches do not have it. A sliding gate needs a clear run of wall beside the opening — roughly the width of the gate itself.

Best for: Wide openings on narrow streets, and 10 Marla homes where a swing gate would hit the parked cars. Our sliding main gate designs guide covers the designs and the clearance they need.

4. Grand Wrought Iron Scroll Gate

The traditional wrought iron look — scrolls, curls and spearheads — built at full 10 Marla scale, with heavier bars and a fuller pattern. It needs pillars that can carry the weight: reinforced brick or concrete, not ordinary brickwork. Get the pillars checked before you order a heavy gate, not after.

Best for: 10 Marla homes with a traditional or classic elevation, and owners who want the wrought iron look at full size. See our wrought iron main gate page for the heavier traditional designs.

5. Horizontal Slatted Gate, Wide Format

Straight horizontal rows of hollow steel sections, set with even, narrow gaps, inside a solid frame — run across a 12 to 20-foot opening. The horizontal lines suit a wide front: they carry the eye across the elevation, and the gate stays lighter than a solid sheet gate of the same width.

Best for: 10 Marla homes with modern grey or white elevations and a wide front. Pair it with a matching simple iron main gate design approach if you want the whole entrance kept minimalist.

6. Bi-Fold Gate for Wide Openings

A gate that folds back on itself in sections and slides out of the way. It needs almost no swing room and no long wall run, which makes it the answer where neither a swing gate nor a sliding gate fits — a short driveway, a narrow street, or a wall that turns a corner. The folds also solve the weight problem: each section is light, so the gate never hangs its full weight on one hinge.

Best for: Wide 10 Marla openings with a short driveway or a corner plot.

7. Dual-Tone Iron + Wood-Look Gate

An iron frame with wood-look panels — powder-coated steel or aluminium composite in teak or walnut — paired with matte black iron. It suits modern grey-and-concrete elevations: warm enough to soften the concrete, dark enough to stay modern, and lighter than solid timber.

Best for: New 10 Marla constructions with fair-face concrete, grey plaster or cubist elevations.

8. Arched-Top Gate

A gate whose top rail rises into an arch, or carries a decorative arched panel above a straight frame. The arch suits a 10 Marla front with a tall boundary wall or an arched main door: it repeats the curve of the house and gives a wide gate a centre to look at. It needs a taller wall to sit against — on a low wall, it looks out of place.

Best for: 10 Marla homes with arched windows or doors, and classic or colonial-style elevations.

9. Stainless Steel + Iron Combination Gate

A stainless steel frame and border with iron infill panels — or the reverse. Stainless steel resists rust far better than mild steel, which matters on a street that floods in the monsoon. It costs more and is heavier, so the pillars and hinges must be up to it, but the bright finish stays clean with far less care than paint.

Best for: 10 Marla homes on streets that flood, and owners who want a bright, low-maintenance finish.

10. Solid Sheet Gate with a CNC Border

A plain mild-steel sheet for full privacy, edged with a laser-cut CNC border or a patterned top rail so it does not read as a blank metal wall. At 10 Marla width this is the heaviest design in this guide, so it needs a properly built frame, good hinges and strong pillars — but for a street-facing house where privacy comes first, it is the most complete answer. Match it with the same CNC pattern on the balcony railing above the porch — our Outdoor CNC Balcony product shows how the pattern runs across a balcony.

Best for: Street-facing 10 Marla houses, houses on busy roads, and owners who want full privacy from the street.

Main Gate Size for a 10 Marla House

The standard main gate size for a 10 Marla house is 12 to 15 feet wide and 6 to 7 feet tall, measured as the clear opening between the finished pillars — not the panel size, which is made slightly smaller for hinges, locks and drop bolts. Wider openings of 18 to 20 feet appear on 50×50 plots and on houses with a double driveway. Measure the built opening before ordering — construction rarely matches the drawing to the inch.

Gate widthHeightWhat it fits
12 feet6–7 feetOne car with an easy turn-in; 40×60 plots
15 feet7 feetTwo cars side by side, or one car with a wide turn; 35×65 plots
18 feet7 feetTwo cars with a comfortable turn; 35×70 plots
20 feet7 feetDouble driveway; 50×50 plots

Single leaf or double leaf? The dividing line is roughly 8 to 10 feet. A single leaf suits openings up to 8 to 10 feet and works well as a sliding gate, where one panel slides along the wall. A double leaf suits a 10 Marla opening best: each leaf is half the weight, so the hinges last longer and you can open one leaf for a person and both for the cars. Above 15 feet, a sliding or bi-fold gate is usually the better choice, because two swing leaves of that size are heavy and need a long clear arc. For the full tables, see standard main gate sizes in Pakistan and the comparison of wrought iron main gate sizes, 10 vs 12 feet.

Before you order, measure the width between the finished pillars at top and bottom, the height from the finished floor, the swing or slide clearance, and the pillar strength — and send them on WhatsApp for confirmation before fabrication.

Main Gate Design for a 1 Kanal House

A 1 Kanal house is 20 Marla — 4,500 square feet, twice a 10 Marla plot — and its gate follows the same rules at a bigger scale. Fronts are usually 50 to 70 feet wide, and the gate opening is commonly 16 to 20 feet, often with a separate pedestrian gate beside it instead of a wicket built into the main leaves. The porch fits two cars easily, so the gate must clear two cars turning in together.

Everything in this guide scales up: the double-leaf gate gets a separate pedestrian gate, the full CNC jali gate gets a wider canvas, and the grand wrought iron gate gets heavier bars and reinforced pillars. The one thing that does not scale is a single swing leaf — above 10 feet per leaf, a sliding or bi-fold gate is the practical choice. If your house is a 1 Kanal, send your opening measurements on WhatsApp for a quote on your exact size.

Which Material Suits a 10 Marla Gate

MaterialStrengthsWatch out for
Mild steel (iron)Strong, affordable, any design possibleRusts if the coating fails — needs primer + powder coating
Stainless steelResists rust far better, bright finishCosts more; heavier; fewer decorative options
Wrought ironClassic look, very strongHeavy — pillars must be reinforced for a wide gate
Iron + aluminium composite panelLight, modern, wood-look finishesPanels can dent; check the frame fixing

For most 10 Marla houses, mild steel with a proper powder-coated finish is the right balance: strong enough to trust, light enough for the pillars, and the finish — not the metal — is what decides how long it stays rust-free. Stainless steel is worth it if your street floods in the monsoon. Wrought iron is worth it if the classic look is the point of the gate.

What Decides the Price of a 10 Marla Gate

No honest guide can give a fixed price without your measurements — the price is set by six things that change from house to house:

  • Size: a 20-foot gate uses far more material and a stronger frame than a 12-foot gate of the same design.
  • Design: a plain slatted gate costs less than a full CNC jali gate, because laser cutting takes machine time and a cut sheet takes more steel than open bars.
  • Material and thickness: thicker sections and stainless steel cost more than standard mild steel; the gauge of the sheet and the frame is the single biggest hidden difference between two quotes.
  • Finish: powder coating costs more than ordinary paint, and it is the finish that decides whether the gate rusts in two years or ten.
  • Fittings: heavy hinges, a proper lock, drop bolts and a wicket door add cost — and they are the parts that fail first on a cheap gate. A wide gate needs heavier hinges than a narrow one, so do not accept light fittings on a 12-foot-plus gate.
  • Pillars: a heavy wide gate may need pillar work before it can be fitted, and that work is part of the real cost of the gate.

That is also why two quotes for “a 10 Marla gate” can look very different: they are rarely for the same width, thickness, finish and fittings — so ask for the sheet gauge, frame section and coating type in writing when you compare quotes. For a full breakdown, see our wrought iron main gate price in Pakistan 2026 guide.

For an exact price for your house, send your opening size, your design choice and a photo of the front on WhatsApp — Chat on WhatsApp — and get a quote for your gate, not for a generic one.

Matching the Gate to Your Elevation and Main Door

A gate looks right when it matches the house behind it: a modern grey elevation wants clean lines — slatted, CNC geometric or dual-tone — while a traditional elevation with arches or brickwork wants scrolls, pickets or an arched top.

Two practical rules. First, repeat one element: if the main door has a CNC pattern, use the same pattern — or a simpler version of it — on the gate, so the entrance reads as one design. Our CNC main door design page shows matching door-and-gate sets. Second, keep the colour to one or two tones: matte black with one accent — a wood-look panel, a brass handle, a steel border — looks finished; three or four colours look busy, even on a wide front.

The same rule applies above the gate: if the front elevation has a balcony over the porch, match its railing to the gate pattern. Our Outdoor CNC Balcony product carries the same laser-cut pattern on the balcony that your gate carries below it.

If you are still choosing the main door, see the CNC door design in Pakistan guide, and the Top 10 Modern Main Gate Designs in Pakistan for 2026 post for the wider design trends.

Keeping a 10 Marla Gate Rust-Free

An iron gate lives outdoors through dust storms, monsoon rain and summer heat, and rust starts where the coating fails — at the bottom edge, at the joints, and anywhere the gate is scratched. A wide gate has more of all three:

  • Wash it after dust storms. Dust holds moisture against the steel. A wash with plain water and a wipe-down is enough.
  • Touch up chips quickly. A scratched spot is where rust starts. A small tin of matching paint, applied the week the chip appears, stops it.
  • Oil the hinges and lock twice a year. A stiff hinge strains the pillar and the frame. A drop of oil keeps the gate swinging true.
  • Check the bottom edge before the monsoon. Water sits at the bottom rail. If the coating there is thin or bubbling, get it touched up before the rains.
  • Check the drop bolts and the centre meeting point. On a double-leaf gate the two leaves meet in the middle, and that joint takes the weather from both sides.

A powder-coated gate, looked after this way, stays clean for years; a painted gate needs the same care more often.

How to Order a Main Gate for Your 10 Marla House

  1. Measure the opening — width between the finished pillars at top and bottom, height from the finished floor, swing or slide clearance, and the pillar strength.
  2. Choose the design — pick one of the 10 above, or send a photo of a gate you like and the workshop will adapt it to your size.
  3. Send it on WhatsApp — measurements, a photo of the front, and your area. You get a quote for your exact gate, including frame, fittings and finish.
  4. Confirm the details in writing — sheet gauge, frame section, coating type, lock and hinges, and the fitting date — before fabrication starts.
  5. Check the gate on delivery — the coating, the welds, the hinges and the lock — before it is fixed to your pillars.

Al Noor Metal fabricates in its Township, Lahore workshop and fits gates across Lahore, Karachi and Islamabad, and in Multan and Faisalabad. Free on-site measurement in Lahore is available — confirm it when you book.

Frequently Asked Questions

Q1: What is the standard main gate size for a 10 Marla house?

The standard size is 12 to 15 feet wide and 6 to 7 feet tall, measured as the clear opening between the finished pillars. Wider openings of 18 to 20 feet appear on 50×50 plots and houses with a double driveway. House-plan guides suggest 15 feet for a 35×65 plot, 18 feet for 35×70, 12 feet for 40×60 and 20 feet for 50×50 — but measure the built opening first.

Q2: Which main gate design is best for a 10 Marla house?

For most 10 Marla houses, a double-leaf iron gate with a wicket door works best: it suits a 12–15 ft opening, shares the weight across two leaves, and the wicket handles daily use. If your street is narrow, a sliding or bi-fold gate solves the opening problem a swing gate cannot.

Q3: Should a 10 Marla gate be single leaf or double leaf?

Double leaf suits a 10 Marla opening best: each leaf is half the weight, so the hinges last longer and you can open one leaf for a person and both for the cars. Above 15 feet, a sliding or bi-fold gate is usually better than two very wide swing leaves.

Q4: What size gate does a 1 Kanal house need?

A 1 Kanal house (20 Marla, 4,500 square feet) usually needs a 16 to 20-foot gate, often with a separate pedestrian gate beside it. The designs in this guide scale up, but the pillars must be reinforced for the extra weight, and a sliding or bi-fold gate is the practical choice above 10 feet per leaf.

Q5: How much does a main gate for a 10 Marla house cost in Pakistan?

There is no fixed price without your measurements. The price depends on the size (12 to 20 feet), the design, the material and sheet thickness, the finish, the fittings and any pillar work a heavy gate needs. Send your opening size and design choice on WhatsApp for an exact quote.

Q6: How do I stop my iron main gate from rusting?

Keep the coating intact: wash off dust after storms, touch up chips the week they appear, oil the hinges and lock twice a year, and check the bottom edge before the monsoon. On a double-leaf gate, also check the drop bolts and the centre meeting point.

Main Gate Designs in Your City

Al Noor Metal designs, fabricates and fits main gates for 10 Marla houses in Lahore, Karachi and Islamabad — see each city’s page for local designs and fitting. Gates are also supplied in Multan and Faisalabad; contact the workshop directly for those cities.

Contact Al Noor Metal

For a quote, a design consultation, or a free on-site measurement in Lahore, contact Al Noor Metal:

Send your opening measurements and a photo of your front on WhatsApp, and get a quote for a gate built for your 10 Marla house — not a generic one.

Leave a Comment

Your email address will not be published. Required fields are marked *

Contact Now