A CNC door is a metal main door with a pattern cut into the steel sheet by a computer-controlled laser — a precise jali of geometric lines, Islamic patterns, or a design drawn from your own photo, set into a strong iron frame. It is not a carved wooden door and not a plastic-composite door. If you are building or renovating a home in Pakistan and searching for “cnc door design”, this is the door you are looking for: a steel main door that protects your home, lets in light and air through its cutwork, and makes the entrance look finished.
A plain iron door does the job, but it looks plain. A CNC door gives you the same security with a pattern — and because the pattern is cut by a laser instead of by hand, the lines are sharp, the repeats are identical, and the same design can run across your main door and your main gate as a matching set.
This guide covers 8 CNC door design ideas for Pakistani homes, the materials to choose from, the sizes that work, what actually decides the price, and how to keep a steel door rust-free. It is written for a metal main door — the kind Al Noor Metal fabricates in its Township, Lahore workshop — so where it differs from a WPC or wooden CNC door, it says so plainly.
Pro Tip: Decide the material before the pattern. A beautiful pattern on the wrong material is a short upgrade — a steel door and a WPC door fail in different ways, and the pattern that suits one does not automatically suit the other. Choose the door for the entrance it has to guard first, then pick the pattern.
The 8 CNC Door Design Ideas at a Glance
| # | Design | Best for | Privacy | Maintenance |
|---|---|---|---|---|
| 1 | Geometric jali panels | Modern elevations, 5 & 10 Marla homes | Medium | Low |
| 2 | Islamic geometric pattern | Traditional & luxury homes | Medium–High | Low–Medium |
| 3 | Minimal linear grooves | Minimalist homes, small fronts | Medium | Low |
| 4 | Double-door entrance | 10 Marla & 1 Kanal homes, wide entrances | Medium–High | Low |
| 5 | Matching gate + door set | New constructions, corner plots | As designed | Low |
| 6 | Jali + solid panel mix | Privacy with light and air | High | Low |
| 7 | Dual-tone finish | Modern grey / concrete fronts | Medium | Low |
| 8 | Floral & calligraphy panel | Traditional entrances, feature doors | Medium–High | Low–Medium |
Want a price for your door? Send your measurements and a photo of the entrance on WhatsApp — Chat on WhatsApp or call +92 333-4314819 — and get a quote for your exact size and design. See finished work on the CNC main door design page, and all contact options in the Contact Al Noor Metal section at the end of this guide.
What Is a CNC Door Design?
CNC stands for Computer Numerical Control. A designer draws the pattern on a computer, and a fibre laser cutter follows that drawing to cut the pattern out of a metal sheet — usually mild steel or stainless steel. The result is a “jali”: a sheet of steel with a repeating pattern cut through it, welded into a strong frame with hinges and a lock.
Compared with a traditional welded-bar iron door, a CNC door has three real advantages: precision (every repeat is identical), design freedom (curves, calligraphy, and fine detail a welder cannot bend by hand), and consistency (the same pattern can be repeated on the main door and the main gate so the entrance reads as one design). The same laser-cut technique is also used for CNC main gates and grills — see our guide to CNC main gate design in Pakistan and the CNC grill design in Pakistan guide. This guide stays focused on doors, so the pages do not repeat each other.
A CNC door is used in two main places in a Pakistani home: the main entrance, and — in a lighter form — as a security door in front of a wooden door. This guide is about the main entrance door, where security, weather, and the look of the elevation all matter at once.
Metal CNC Door vs WPC CNC Door — An Honest Comparison
Most “CNC door design in Pakistan” guides online are written by WPC (Wood Plastic Composite) door sellers, and they describe a different product: a router-cut pattern in a composite board. A metal CNC door is a different door with different strengths. Here is the honest comparison, so you can choose for your own entrance.
| Factor | Metal CNC door (mild / stainless steel) | WPC CNC door |
|---|---|---|
| Security | High — a steel sheet in a steel frame with a proper lock is a real barrier | Low–Medium — a composite board is easier to force than steel |
| Rust | Needs care — mild steel rusts if its coating fails; stainless steel resists far better | No rust — the material does not corrode |
| Water & monsoon | Fine with a proper powder-coated finish; check the bottom edge and joints | Waterproof — does not swell or absorb water |
| Termites | Immune — termites do not eat steel | Immune — termites cannot feed on WPC |
| Weight | Heavy — needs a strong frame, heavy hinges, and proper fixing | Light — easier to hang and move |
| Pattern detail | Very fine detail possible with a laser, including calligraphy | Fine detail possible with a router, but deep cuts can weaken the board |
| Maintenance | Wash after dust storms, touch up chips, oil hinges | Wipe clean; little else needed |
| Best for | Main entrance doors where security matters | Interior doors, bathrooms, and entrances where security is handled another way |
The short version: if the door is your home’s main defence, a metal CNC door is the right choice — a WPC door cannot match steel for security, however good its pattern looks. If the door is for a bedroom or bathroom and security is not the question, WPC has real advantages. Al Noor Metal fabricates metal doors, so this guide goes deep on the metal door; the WPC comparison is here so you can make the choice with open eyes.
The 8 CNC Door Designs in Detail
The table above is the quick view. Here is each design in detail — what it looks like, where it works best, and what to ask for when you order it.
1. Geometric Jali Panels
The classic CNC door: a repeating pattern of triangles, diamonds, or hexagons cut clean through the steel sheet. From the street you see a pattern, not a clear view into the house, while light and air still pass through the cutwork. It suits modern elevations and works on 5 and 10 Marla homes because the pattern scales well — the same design looks right on a single door and on a double door.
Ask for the pattern density to be matched to your street. On a busy street, a denser pattern gives more privacy; on a quiet street, a more open pattern lets in more light. If you want full privacy with the same look, a fine mesh or a glass panel can be fitted behind the jali — ask for it when you order, because it is easier to fit during fabrication than after installation.
2. Islamic Geometric Pattern
Eight-pointed stars and interlacing lines, cut with the precision only a laser gives — every star identical, every line meeting cleanly. This is the design for traditional and luxury homes, and it pairs well with a solid frame and a brass or antique-finish handle. Because the pattern is dense, privacy is medium to high, and the door reads as a feature in itself rather than just an entrance.
Keep the rest of the elevation calm when you choose this design. A busy pattern on the door plus a busy tile or stone front competes for attention; a plain wall and a simple frame let the pattern do the work. See how the same pattern language works on a full entrance in our main door design in Pakistan guide.
3. Minimal Linear Grooves
Vertical or horizontal lines with wide, even spacing — the quietest design on this list, and often the best one. It suits minimalist homes and small fronts because it does not crowd the elevation, and it is the lowest-maintenance CNC pattern: fewer corners for dust to settle in, and a quick wipe keeps it clean.
This is also the safest choice if you are unsure. A linear-groove door never looks dated, it matches almost any paint colour, and if you later change the gate or the front wall, the door still fits. For a small 5 Marla front, ask for vertical lines — they make a narrow entrance look taller.
4. Double-Door Entrance
Two leaves instead of one: one leaf opens daily and the other stays bolted until you need the full width — for moving furniture, a wedding, or Eid gatherings. The pattern runs across both leaves so that, closed, the door reads as a single design. This is the natural choice for 10 Marla and 1 Kanal homes with wide entrances, and for any home where the main door opening is wider than a single leaf can cover gracefully.
A double door needs a stronger frame and heavier hinges than a single door, and both leaves must be hung true or the pattern will not line up when closed. That is fabrication work, not something to fix after fitting — so order the frame with the door, as one job. For entrance ideas at this scale, see the main door design in Pakistan guide.
5. Matching Gate + Door Set
The same pattern, the same finish, on the main gate and the main door — the entrance reads as one design instead of two separate purchases. This works best on new constructions and corner plots, where the gate and the door are seen together from the street.
Order the set together. The finish then comes from the same paint batch, so the gate and the door age the same colour, and the pattern repeats are cut to match. If you order the gate now and the door a year later, the same pattern can still be cut — the design file is kept — but the finish may not match exactly. Browse finished work on the CNC main door design page and the CNC main gate design in Pakistan guide before you choose.
6. Jali + Solid Panel Mix
Top half jali, bottom half solid — or the reverse. You keep the light and air coming through the top while the solid lower half gives real privacy, which is exactly what a home on a busy street needs. It is also a practical mix: the solid panel takes the knocks at the bottom, where a door gets kicked, hit by bicycles, and splashed in the rain, while the jali stays up where it is safe.
This is a good design to pair with wrought iron details — a solid panel with a wrought iron frame and a CNC jali above it. For the solid-panel side of the idea, see our wrought iron main door design page.
7. Dual-Tone Finish
The frame in one colour and the pattern panel in another — charcoal frame with a bronze or antique-gold pattern, or black with a wood-finish panel. It suits modern grey and concrete fronts, where a single flat colour would disappear into the wall.
A dual-tone door is a paint decision, not a different door, so agree the colours before fabrication and ask to see the colour card — a colour that looks good on a phone screen can look very different on a steel sheet in daylight. And if you are matching the door to balcony grills or window grills in the same finish, order them together; see the CNC grill design product page for the matching grill work.
8. Floral & Calligraphy Panel
A floral vine or an Arabic calligraphy panel as the centrepiece of the door, with the rest of the door kept simple. This is the traditional entrance and the feature door — the panel is the point, so everything around it should stay quiet. Fine detail is where laser cutting earns its price: curves and lettering a welder cannot bend by hand come out clean and identical every time.
Keep the panel size in proportion to the door. A calligraphy panel that is too small looks lost; one that is too large leaves no room for the frame and hinges. Ask for a drawing of your door with the panel in place before fabrication starts, so you can see the proportions before any steel is cut.
Choosing a CNC Door by House Size
The right door depends on the size of the house and the width of the entrance, not on the design you liked in a photo.
5 Marla homes: a single door, with a pattern that does not overwhelm a narrow front. Linear grooves, a light geometric jali, or a jali + solid panel mix all work well. Keep the frame slim and the colour close to the wall colour so the entrance does not look crowded.
10 Marla homes: a single wide door or a double door, depending on the opening. This is where a matching gate + door set starts to pay off, because the gate and the door are both visible from the street and the entrance is wide enough to carry one design across both.
1 Kanal homes: a double-door entrance, usually with a matching gate set and a heavier frame. The pattern can be bolder here — an Islamic geometric or a calligraphy panel — because there is enough wall and gate around it to carry the detail.
Separate guides for main gate designs for 5 Marla homes and for 10 Marla / 1 Kanal homes are being prepared; this guide covers the door only, so the gate is mentioned here only where the door and the gate are ordered as a set.
Sizes & Measurement Guide
A CNC door is fabricated to your opening — there is no standard size that fits every house, and ordering by a guessed size is the most common expensive mistake. Measure properly, and get the measurement checked before fabrication starts.
- Measure the width in three places — top, middle, and bottom of the opening — and use the smallest of the three. Old openings are rarely perfectly square.
- Measure the height on both sides — left and right — and use the smaller figure.
- Measure the wall thickness (the depth of the opening), because the frame is made to that depth.
- Check the opening is level and plumb — a door hung in a leaning opening will never close cleanly, however well it is made.
- Photograph the opening from straight on and from an angle, and send the photos with your measurements on WhatsApp. A photo shows the fabricator things a tape measure does not: the condition of the existing frame, the step at the threshold, and what is around the door.
If you are unsure about any measurement, ask whether on-site measurement is available in your city before you order — do not assume it, and do not order a door on measurements you are not confident about. A wrong measurement means a door that has to be remade or forced into place, and neither is a good outcome.
What Decides the Price of a CNC Door?
There is no single rate for a CNC door, because the price is set by the door itself — its material, size, pattern, finish, and hardware. Here are the factors, so you can see where your money goes and what to decide before you ask for a quote.
| Price factor | What it means for the price |
|---|---|
| Material | Stainless steel costs more than mild steel; it also needs far less rust care |
| Sheet thickness | A thicker sheet uses more steel and costs more — and it is also stronger and heavier |
| Pattern complexity | Dense, fine patterns take longer on the laser, so they cost more than simple lines |
| Door size | A bigger door uses more material; a double door costs more than a single door |
| Finish | Powder coating costs more than ordinary paint but lasts longer |
| Hardware | The lock, hinges, and handles — a good lock is worth more than a decorative handle |
| Frame & installation | The frame, fixing, and fitting are part of the job, not an extra |
| Delivery distance | Transport from the workshop to your city adds to the total |
How to get an exact quote: measure your opening (see the guide above), choose your design, material, and finish, then send the measurements and a photo of the entrance on WhatsApp — Chat on WhatsApp or call +92 333-4314819. The quote is given per door, for your exact size and design — not a per-square-foot rate that hides the details. For how CNC work is priced in general, and why there is no single rate, see our CNC main gate price in Pakistan guide.
Rust Care: Keeping a Steel Door Rust-Free
A mild steel door rusts when its coating fails — that is the one weakness of the material, and it is entirely manageable if you catch it early. Stainless steel resists rust far better, but it still needs washing. Here is the care routine, for the climate your door actually lives in.
- Wash after dust storms. Lahore’s dust settles into every cut of a jali pattern. A wash with clean water and a soft cloth, then drying, keeps the dust from holding moisture against the steel.
- Dry the bottom edge. Water pools at the threshold in the monsoon. Wipe the bottom rail dry after heavy rain, and keep the drain at the threshold clear.
- Touch up paint chips immediately. A chip is a small job today and a rust patch in six months. Keep a small tin of matching paint, and touch up any chip or scratch as soon as you see it.
- Oil the hinges every few months. A drop of oil on each hinge keeps the door swinging true and stops the squeak that means metal is wearing on metal.
- Check the joints once a year. The welds and the corners of the frame are where rust starts. If the finish is chalking or peeling, it is time for a recoat — do not wait for rust to show through.
- Karachi homes need extra care. Salt air attacks coatings faster than inland air. Wash the door more often, keep the coating intact, and choose a finish suited to coastal air when you order.
A well-kept steel door lasts for years without a problem; a neglected one rusts from a single chipped corner. The care is simple — it is the regularity that matters.
CNC Door Designs in Lahore, Karachi, Islamabad, Multan & Faisalabad
Al Noor Metal serves homes across Pakistan from its Township, Lahore workshop, and the right door — and the right care — changes a little with the city.
Lahore — main gate design in Lahore: the home city. Summer heat and dust storms are the main concern, so a finish that handles dust and a pattern that is easy to wash matter most. Measurement and delivery are quickest here.
Karachi — main gate design in Karachi: humidity and salt air. Ask for a finish suited to coastal air, wash the door more often, and keep the coating intact — the rust care section above matters most in Karachi.
Islamabad — main gate design in Islamabad: rain is the main factor. Keep the threshold drain clear and the bottom edge dry, and the door will last as well here as anywhere.
Multan and Faisalabad are also served — mention them here without links, because their location pages do not exist yet. In Multan, extreme summer heat means the finish must handle expansion and strong sun; in Faisalabad, dust and heat are the same concern as in Lahore. For a quote or delivery to any of these cities, send your measurements and entrance photo on WhatsApp.
Frequently Asked Questions
What is the difference between a CNC door and a normal iron door?
A normal iron door is made by welding bars and sheets by hand. A CNC door has its pattern cut into the steel sheet by a computer-controlled laser, so the lines are sharp, the repeats are identical, and fine detail — curves, calligraphy, dense geometry — is possible that a welder cannot bend by hand. Both are steel doors; the CNC door is the one with a precise cut pattern.
How much does a CNC door cost in Pakistan?
There is no single rate. The price depends on the material (mild steel or stainless steel), sheet thickness, pattern complexity, door size, finish, hardware, and delivery distance. For an exact quote for your door, send your opening measurements and a photo of the entrance on WhatsApp — Chat on WhatsApp — and the quote is given per door, for your exact size and design.
Is a CNC metal door secure?
Yes — that is the main reason to choose metal over WPC for a main entrance. A steel sheet in a steel frame, with a proper lock and heavy hinges, is a real barrier. The cut pattern does not weaken the door the way a hollow panel would, because the sheet is one piece of steel with a pattern cut through it, held in a full frame. Fit a good lock — it is the cheapest security upgrade on the whole door.
Will a CNC door rust?
A mild steel door can rust if its coating fails, so chips must be touched up and the door washed after dust storms — see the rust care section above. A stainless steel door resists rust far better but still needs washing. Neither rusts overnight; rust is what happens when small damage is ignored for months.
Metal CNC door or WPC CNC door — which is better for a main entrance?
Metal, for security. A WPC door cannot match steel as a barrier, however good its pattern looks. WPC has real advantages — waterproof, no rust, light — but they matter for interior doors and bathrooms, not for the door that guards the house. If the door is your home’s main defence, choose metal.
Do you deliver CNC doors outside Lahore?
Yes. Al Noor Metal serves Lahore, Karachi, Islamabad, Multan, and Faisalabad. Send your measurements and a photo of the entrance on WhatsApp — Chat on WhatsApp or call +92 333-4314819 — and ask for delivery and fitting in your city.
Contact Al Noor Metal
Ready to order your CNC door, or want a quote for your exact size and design? Contact Al Noor Metal — in business since 2015, fabricating CNC and wrought iron doors, main gates, railings, and grills from its Township, Lahore workshop.
- Workshop: Corner AL-Qaseem Market, Ameer Chowk, College Road, Township, Lahore
- Phone / WhatsApp: +92 333-4314819 — Chat on WhatsApp
- Email: info@alnoormetalpk.com
- Hours: Monday to Saturday, 09:00–18:00
- Contact page: alnoormetalpk.com/contact/
Send your opening measurements and a photo of the entrance, along with the design you liked from this guide, and get a quote for your exact door. Serving Lahore, Karachi, Islamabad, Multan, and Faisalabad.


Pingback: Main Gate Design for 5 Marla House 2026 | 10 Ideas, Sizes & Price Guide