A CNC grill is a laser-cut metal jali — a decorative steel screen cut by a computer-controlled laser, made to fit your window, balcony, staircase, or main door exactly. Al Noor Metal designs, cuts, and installs CNC grills for homes across Pakistan, from our own workshop in Township, Lahore.
If you have seen a grill design you love — in a photo, at a neighbour’s house, or on a new elevation in your street — send it to us on WhatsApp with your measurements, and we will make it for your opening. If you have not chosen a design yet, the showcase below shows what we make, by application, so you can pick the right one for your home.
Trusted since 2015. Al Noor Metal has been fabricating gates, doors, railings, and grills in Pakistan since 2015. Every CNC grill is cut in-house on our own fibre laser, finished in our own workshop, and fitted by our own team — no outsourcing, no middleman.
Pro Tip: A grill is measured by its opening, not by a catalogue size. Before you shortlist a design, measure the width and height of each window or balcony in feet and inches. Every grill on this page is made to order for your exact measurements.
CNC Grill Designs by Application
Window CNC Grills
Our most ordered grill. A laser-cut panel fixed over the window in a strong steel frame — security, light, and ventilation in one fitting, with a pattern that suits the room. Geometric and light floral patterns are the most popular for bedrooms and lounges, with small, even gaps for safety.
Window grills are usually cut from mild steel sheet between 2mm and 5mm thick, powder-coated over an anti-rust primer. Stainless steel is available for kitchens and bathrooms, where steam and moisture are constant. Fixed panels are the standard choice; sliding and openable panels are available for windows you need to reach for cleaning.
Best for: Bedrooms, lounges, kitchens, and street-facing windows on 5 and 10 Marla homes.
Balcony CNC Jali
A large laser-cut panel that forms the balcony front or side, instead of a plain railing or a solid wall. It gives you privacy from the street, keeps children safe, and still lets the breeze through on a hot evening. Lattice and geometric patterns are the most popular, because the panel reads as one designed surface from the street.
Balcony jalis are fixed to a strong frame with proper anchors — a balcony jali is a safety barrier, not just decoration, so the fixing matters as much as the pattern. Aluminium is available where weight matters on upper floors.
Best for: Front balconies, first-floor terraces, and corner balconies in DHA, Bahria Town, and similar housing schemes.
Stair CNC Grills
A laser-cut panel fitted along the staircase, as the side of the stairs or as an infill inside a railing. It turns a plain staircase into a feature of the house, and it is one of the most photographed CNC grill applications in modern Pakistani homes. Vertical and tall geometric patterns suit stairs best, because they follow the angle of the staircase.
Best for: Double-height lounges, open staircases, and homes where the stairs are visible from the entrance.
Main Door CNC Grills
A grill panel set into the main door itself, or fitted as a security grill in front of it. It gives a steel or wooden door a designed face, lets you see who is outside, and adds a layer of security without a second solid door. Floral and calligraphy patterns are popular here, because the door is the first thing a visitor sees.
Best for: Main entrances, double doors, and homes that want a secure door that still looks premium.
Front Elevation Jali
Large CNC-cut panels used as a feature on the front of the house — over a porch, beside the main door, or as a screen on the boundary wall. Large-scale geometric patterns read best from the street; fine detail is lost at a distance. With a light behind the panel, an elevation jali looks completely different at night.
Best for: New constructions, corner plots, and 10 Marla and 1 Kanal homes with a wide front.
Want to see the full design guide? Read our CNC grill design in Pakistan blog — 10 design ideas, materials compared, sizes, price factors, and rust care — then come back here to order.
Why Al Noor Metal for Your CNC Grill
- Experience since 2015. We have been fabricating metalwork for Pakistani homes for over a decade — gates, doors, railings, and grills, in Lahore and across the country.
- Transparent pricing, per sq ft or per kg. Your quote is based on your measurements, material, thickness, and design. No hidden charges, and no fixed price list that pretends every grill costs the same.
- In-house fibre laser cutting. Your pattern is cut on our own laser, in our own workshop — sharp, identical repeats, fast turnaround on complex designs, and no waiting on a third party.
- Anti-rust treatment as standard. Every mild steel grill is finished over an anti-rust primer with a powder-coated finish — the coating that decides how long a grill lasts in Pakistani weather.
- Nationwide delivery and installation. We deliver and install across Pakistan from our Township, Lahore workshop. Lahore jobs have no inter-city freight; other cities include transport in the quote.
- Factory-direct, no middleman. You deal with the workshop that makes your grill. If a measurement needs checking or a design needs redrawing, it is done in-house, before cutting starts.
How to Order Your CNC Grill — 4 Steps
Step 1: Send your measurements on WhatsApp
Message us on WhatsApp at +92 333-4314819 with the width and height of each opening (in feet and inches), and a photo of the window, balcony, stair, or door. Measure in two places — openings are rarely perfectly square.
Step 2: Choose your design
Pick a design from the showcase above, or send a reference photo of a design you love. We will redraw it to fit your exact opening — a design is never just stretched to fit, because a stretched pattern looks wrong.
Step 3: Get your quote
You receive a quote for your exact job, based on current steel rates, your measurements, material, thickness, and design. The quote covers fabrication and, if you want it, delivery and installation. Approve it, and fabrication starts.
Step 4: Fabrication & installation
Your grill is laser-cut, finished, and quality-checked in our Lahore workshop, then delivered and fitted by our team. We confirm the fitting date with you in advance, and we check the frame, fixing, and finish on site before we leave.
Start now: Chat on WhatsApp or call +92 333-4314819 — send your measurements and a photo, and get your quote.
CNC Grill Price — What Decides the Cost?
There is no single fixed price for a CNC grill, because every grill is a different size, material, and design. Steel rates change, and a generic price from a website is not a safe budget for your home. Your quote depends on eight factors:
- Sheet thickness — usually 2mm to 5mm; thicker sheets cost more and suit large panels.
- Material — mild steel, stainless steel, or aluminium, each priced differently.
- Design complexity — a dense floral or calligraphy pattern takes longer on the laser than a simple geometric one.
- Size and total area — quoted per square foot or per kg.
- Finish — powder coat, matte black, paint, or polished stainless steel.
- Fixed or openable — sliding and openable grills add track, rollers, hinges, and locks.
- Installation — supply-only, or supply-and-fix including measurement, delivery, and fitting.
- Custom work — a design drawn from scratch from your photo takes longer than an existing cutting file.
For the full explanation of each factor, with the buying guide and rust care, read our CNC grill design in Pakistan blog. Then send your measurements on WhatsApp for a quote for your exact job.
Pro Tip: When you compare quotes, check whether each one is per square foot or per kg, and whether it includes installation. A supply-only price and a supply-and-fix price are not the same number.
CNC Grill Design in Lahore, Karachi, Islamabad, Multan & Faisalabad
Al Noor Metal serves homes across Pakistan from its Township, Lahore workshop.
- Lahore — our home city. On-site measurement and installation are simplest here, with no inter-city freight. Window grills, balcony jalis, and elevation panels for 5 and 10 Marla homes across Township, Johar Town, and DHA.
- Karachi — sea air means moisture, so stainless steel or a well-coated mild steel grill is the sensible choice. Balcony jalis and window grills are the most ordered items.
- Islamabad — modern elevations in DHA and Bahria Town suit geometric and minimalist matte black designs. Front elevation jalis and stair grills are popular in the capital’s newer homes.
- Multan — heat and dust favour simple patterns with a strong powder coat. Window grills and main door grills are the most common orders.
- Faisalabad — the same advice as Multan: simple patterns, good coating, and regular washing after dust storms. Window and balcony grills lead here too.
Ask on WhatsApp about measurement and installation in your city.
Frequently Asked Questions (FAQs)
Q1: How do I get a quote for a CNC grill?
Send your measurements (width and height of each opening, in feet and inches) and a photo of the window, balcony, stair, or door on WhatsApp to +92 333-4314819, with the design you like or a reference photo. You will get a quote for your exact job, based on current steel rates and your actual sizes.
Q2: Can you make a CNC grill from a photo of a design I like?
Yes. Send the photo on WhatsApp, and we will redraw the design to fit your exact opening before cutting. A design is never just stretched to fit — it is redrawn at your size, so the pattern stays correct.
Q3: Is installation included in the price?
It can be. We quote supply-only or supply-and-fix — measurement, delivery, and fitting included. Tell us which you want when you ask for the quote, and the price will reflect it. Lahore installations have no inter-city freight; other cities include transport.
Q4: How long does it take to make and install a CNC grill?
It depends on the size of the order and the complexity of the design — a single window grill is quicker than a full set of balcony jalis. Once you approve the design and quote, we confirm the fabrication and fitting dates with you. Custom designs drawn from a photo take longer than existing designs, because of the drawing time.
Q5: What thickness and material should I choose?
CNC grills are usually cut from sheet metal between 2mm and 5mm thick — thinner sheets for small windows and decorative panels, thicker sheets for large balcony panels and main doors. Mild steel with a powder-coated finish is the standard choice; stainless steel suits kitchens, bathrooms, and coastal areas; aluminium suits upper floors where weight matters. Tell us where the grill will go, and we will recommend the right combination for that application.
Related Work
- CNC grill design in Pakistan — the full design guide: 10 ideas, materials compared, sizes, price factors, and rust care.
- CNC railing design price in Pakistan — our most-visited page: CNC railings, with price guidance.
- CNC main gate design in Pakistan — laser-cut main gates to match your grills.
- Modern CNC balcony railing design in Pakistan — railing-style alternatives for balconies.
- CNC main door design — laser-cut main doors.
- Contact Al Noor Metal — all contact options and the workshop address.
Contact Al Noor Metal
Order your CNC grill in one message — send your measurements, a photo of the opening, and the design you liked.
- WhatsApp / Call: +92 333-4314819 — Chat on WhatsApp
- Email: info@alnoormetalpk.com
- Workshop: Corner AL-Qaseem Market, Ameer Chowk, College Road, Township, Lahore
- Hours: Monday–Saturday, 09:00–18:00
- Contact page: Contact Al Noor Metal
- Design guide: CNC grill design in Pakistan
- Service areas: Lahore, Karachi, Islamabad, Multan, and Faisalabad — on-site measurement and installation available. Ask on WhatsApp about measurement in your city.
Call to action: WhatsApp Al Noor Metal on +92 333-4314819 with your grill measurements and a photo of the opening — get a quote for your CNC grill today. Al Noor Metal has been fabricating gates, doors, railings, and grills in Pakistan since 2015.





Reviews
There are no reviews yet.